Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165

 This part is available by special order, request a quote

Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers

To fit these frames, you may need to lower the tail light so this does not foul the rack. You may also need to drill the mudguard if you are to use the brace for the pannier frames. Pillion pegs may need moving forward slightly to accomodate panniers.

 This part is available by special order, request a quote

Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simplifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi. Uses oil filter SIA14530

Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black by special order - ENA14006

 This part is available by special order, request a quote

Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simpifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. The kit consists of:

1. Deep sump casting (82mm deep) with all oil ways. Uses oil filter SIA14530
   Replaces sump extension ENA14002. Finished in black this is a great upgrade for your Guzzi

   Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black to special order

    This part is available by special order, request a quote

   [ CLOSE WINDOW ]
   [ CLOSE WINDOW ]

Pair of black 30 litre Junior panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers. These panniers are compatible with the frames used for Hepco Classic panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of black 40 litre Junior panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. A crash helmet will fit in these 40 litre panniers. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers. These panniers are compatible with the frames used for Hepco Classic panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

• Reduction in flywheel and clutch weight of approx. 1KG
• Improved acceleration
• Smoother gear changes at high RPM
• Quicker engine decelleration
• Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
• Lighter handlebar clutch lever action
• More precise clutch engagement and disengagement.
• More progressive clutch engagement.
• Increased ability to handle higher torque and horsepower.
• Lower clutch disk wear (reduced maintenance)
• Fewer parts (no intermediate plate, no second friction plate) to wear out
• Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of stylish black 30 litre Junior Flash panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Silver painted cover can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of stylish black 40 litre Junior Flash panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Silver painted cover can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available
A crash helmet will fit in these 40 litre panniers

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of slash cut cone Mistral performance silencers in a polished finish. These are a high quality, durable and better sounding alternative to the original silencers. Fitted with removable baffles they have a distinctive bassy tone. Please note these do not come with brackets so you will need to reuse your existing brackets or get some fabricated

Handmade to order in Italy
Also available in satin finish

Release the music in your Guzzi!

Not what you're looking for? We can supply a range of silencer shapes and finishes for your model - contact us with your requirements and we'll advise on availability and price

 This part is available by special order, request a quote